BDDYT - RED LEAD PRIMER COATING
- MSDS: BDDYT
- Manufacturer: SEAGUARD CORP
- Product Name: RED LEAD PRIMER COATING
- National Stock Number: 8010-00-165-8574
Product Identification
Product ID:RED LEAD PRIMER COATING
MSDS Date:01/01/1985
FSC:8010
NIIN:00-165-8574
MSDS Number: BDDYT
Responsible Party
PORTSMOUTH, VA 23705
US
Cage: JO928
Contractor
Telephone: 757-397-2223
Cage: 60163
Ingredients
PIGMENTS
Fraction By Weight: 51.6%
VEHICLE
Fraction By Weight: 23%
SOLVENTS
Fraction By Weight: 25.3%
ACGIH TLV: 200 PPM
ADDITIVES
Fraction By Weight: -2%
LEAD TETROXIDE (RED LEAD), (OSHA PEL FROM 29CFR 1910.1025)
CAS: 1314-41-6
RTECS: OG5425000
Fraction By Weight: 27.5%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.15 MG/M3(PB); 8990
Hazards
Effects of Overexposure:MAY BE IRRITATING TO SKIN AND RESPIRATORY
SYSTEM.
First Aid
First Aid:REMOVE SUBJECT TO WELL VENT. AREA IN CASE OF
OVER-INHALATION.WASH EXPOSED SKIN WITH SOAP AND WATER.CALL MD. IF
NECESSARY.
Fire Fighting
Flash Point:100F ASTM D 93
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL,ALCOHOL FOAM,CARBON DIOXIDE
Fire Fighting Procedures:USE AIR-SUPPLIED BREATHING EQUIPMENT FOR
ENCLOSED AREAS.
Accidental Release
Spill Release Procedures:SMALL SPILLS MAY BE PICKED UP WITH ABSORBENT
MATERIAL AND PUT IN A SUITABLE CONTAINER.
Handling
Handling and Storage Precautions:SECURE ALL SOURCES OF IGNITION. STORE
IN COOL DRY PLACE AWAY FROM OPEN FLAME AND PHYSICAL ABUSE.
Other Precautions:ODOR THRESHOLD IS NOT SUFFICIENT TO WARN OF
POTENTIALLY DANGEROUS CONCENTRATIONS.
Exposure Controls
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL AND MECHANICAL EXHAUST
Protective Gloves:YES
Eye Protection:YES
Supplemental Safety and Health
MINERAL SPIRITS PY8240000 100F ASTMA D 93 37.7C
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:302F 150C
Vapor Pres:10
Vapor Density:4.8
Spec Gravity:1.52-1
Evaporation Rate & Reference:-1
Solubility in Water:INSOLUBLE
Appearance and Odor:RED-ORANGE LIQUID,PETROLEUM ODOR
Percent Volatiles by Volume:50
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAMES,UNGROUNDED EQUIPMENT.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.